SABREEN offers the following plastic laser marking solutions:
- Custom laser colormatch formulations, regulatory compliance, prototype samples
- Injection molding process optimization, dispersion/distribution, analytical testing
- Laser equipment systems design & integration, machine vision
- On-site problem-solving, laser process optimization, vectorized artwork/graphics
- Laser safety certification, laser safety officer (LSO)
Let our team of experts take care of your plastic laser marking needs for your next project. We earn the trust and confident reliance of every client, in every circumstance. Our culture is focused upon achieving superior manufacturing solutions and driving advances in technology through our unwavering commitment to excellence. Every SABREEN Group expert is renowned in their discipline. FAILURE IS NOT AN OPTION!
Plastic Laser Marking - Total Solutions for High Contrast Laser Marking of Plastics
The demand for high-contrast laser marking on nylon (polyamide) plastic products is rapidly increasing due to its wide range of industrial applications. Functional and decorative markings include alphanumeric identification, data matrix/QR vision codes, diagrams and micro-structures.
Polyamides, including Polyphthalmides (PPA), are among the most challenging polymers to laser mark due to their diverse material properties, molding conditions and laser configurations. Smart additives for near-infrared lasers solve marking contrast problems and increase marking speed (faster cycle time) without affecting material properties.
This article provides an understanding of nylons, chemical additives and fiber lasers to achieve high-contrast color and economical laser marking operations.
A basic parameter for describing the quality of marking is the color contrast between the marked surface and the substrate. There are three surface mechanisms for color change using NIR lasers, including Ytterbium fiber, Vanadate (Nd:YVO4) and Nd:YAG: 1) black marking by carbonization, 2) white marking by foam generation and 3) color changes by laser-induced thermal chemical reactions of pigmented polymers1. Among the most demanded contrast colors are opaque white on black, jet black on white and opaque white on medium blue. These color combinations often require chemical additives. Additives improve the degree of color contrast (absorption of laser light), which are further intensified by optimal laser selection and marking parameters.
What Is Nylon (Polyamide)?
Polyamides, or nylon, are the major engineering and high-performance thermoplastics class containing repeating amide linkages, i.e., –CO-NH–. These are is formed by condensing identical units, copolymers for different units.
Nylon is made from polycondensation of diacid with a diamine or by ring-opening polymerization of lactams with six, 11 or 12 carbon atoms2. Nylon monomers can be aliphatic, semi-aromatic or aromatic (aramids) and can range in structure from amorphous, semi-crystalline and of greater or lesser crystallinity.
The aliphatic polyamides are produced on a much larger scale than the fully aromatic polyamides and are one of the most important class of engineering thermoplastics.
Two important polyamides are poly(hexamethylene adipamide) (nylon 6,6) and polycaprolactam (nylon 6). Additional aliphatic polyamides include nylon 12, 69, 6-10, 6-12, 46 and 1212. Nylon 11 is a bio-based engineering plastic that is derived from renewable resources (castor plants).
Semi-aromatic, semi-crystalline polyamides made from the condensation of aliphatic amides include PA 6T & PA 6I. Semi-aromatic polyamides often are a cost-effective alternative to the more expensive fully aromatic aramids. Aromatic polyamides, called aramids, have higher strength, better solvent-, flame- and heat-resistance and greater dimensional stability than aliphatic amides. A commonly recognized aromatic amide is Kevlar, poly(p-phenylene terephthalamide).
Polyamides, including Polyphthalmides (PPA), are among the most challenging polymers to laser mark due to their diverse material properties, molding conditions and laser configurations.
Polyphthalamide (PPA) is a subset of thermoplastic synthetic resins in the polyamide (nylon) family, defined as when 55% or more moles of the carboxylic acid portion of the repeating unit in the polymer chain is composed. PPA is semi-aromatic, semi-crystalline. PPAs fill the performance gap between aliphatic nylons, such as PA6,6 and PA6, and the much more expensive polyaramids.
“Smart” Additives
One parameter for describing the quality of marking is the color contrast between the marked surface and the background. Contrast is not always achieved by the color change itself, as it also can be obtained by the variable light diffraction.
Equally important is marking quality and/or fidelity, i.e., fine-line resolution or sharpness. Many polymers, including nylons, do not inherently absorb laser light, which prevents color change. Laser-enhancing chemical additives significantly improve marking contrast, speed and durability (see Image 1). Substrate color is a factor since compounds like carbon black, TiO2 and flame retardants possess varying degrees of laser light absorption.
Laser additives are supplied in pellet granulate and powder form. Granulate products are blended directly with the polymer resin, while powder forms are converted to masterbatch. The loading concentration level by weight (in the final part) typically ranges between 0.01 and 3.0%. Homogeneous distribution/dispersion of laser additives throughout each part is critical to achieve optimal color contrast.
Color adjustments are made using pigments and dyes to achieve the final colormatch appearance. Specific additives have received FDA approval for food contact and food packaging use under conditions A-H of 21 CFR 178.3297 Colorants for Polymers 1.
Ytterbium Fiber Lasers
NIR Ytterbium fiber lasers entered the industrial marking market in the 2010 timeframe, replacing traditional YAG lasers. Fiber lasers possess superior beam quality (M2) and high-brightness and can focus to a small spot size (less than 20 microns), which leads to high energy density. Fiber lasers are extremely versatile, cost effective and plug-and-play with near zero maintenance.
Fixed-pulse (Q-switched) and variable pulse (MOPA) nanosecond fiber lasers are sold by several laser companies, including IPG Photonics and SPI Lasers. Q-switched fiber lasers, typically 100 to 150 ns pulse width, are employed for some polymer marking applications, but their repetition rate is limited to around 80 kHz because of the inherent constraint of Q-switching technology.
Directly modulated MOPA (DM-MOPA) fiber lasers operate at repetition rates up to 500 kHz at nanosecond pulse widths. Pulse Width [ns] is a measure of the time between the beginning and end of the pulse, typically based on the full width half maximum (FWHM) of the pulse shape.
High repetition rates generally translate into faster marking speed (in conjunction with other laser/wave form parameters). There are significant differences in wave forms and degree of surface carbonization3 (see Image 1).
Localized spatial and temporal control of the laser heat input and of the rate of heat input enable maximum performance. For temperature-sensitive polymers, variable short-pulse (MOPA) fiber lasers are particularly effective in achieving high contrast without excessive carbonization.
Subsurface marking is achievable on clear plastics for medical applications. Generally, MOPA lasers generate pulse widths (pulse duration) from 1 ns to 250 ns (and higher). The Sabreen Group has found 20 ns to 50 ns an ideal range for optimal color contrast in many polymer applications, including nylons.
In cosmetic and functional marking contrast, laser additives make a critical difference when high-resolution, line-edge quality and small data cells are required for direct part marking (DPM) data matrix and bar code. The longer the data string, the more condensed become the data cells.
Grade “A” verification often is required for military, aerospace, automotive and pharmaceutical products. High-contrast code readability has additional benefits – faster marking speeds and low-cost, hand-held readers can be used throughout the factory.
Conclusion
References
- Sabreen, S. Fiber Lasers: Selection and Additives, Plastics Decorating, November 2017.
- Polyamide (PA) Nylon Complete Guide, SpecialChem 2019.
- Brodsky, M. Wave Forms: A New Laser Tool, Optics & Photonics, March 2012.
Scott R. Sabreen is founder and president of The Sabreen Group, Inc., an engineering company specializing in secondary plastics manufacturing processes – laser marking, surface pretreatments, bonding decorating and finishing and product security. Sabreen has been developing pioneering technologies and solving manufacturing problems for over 30 years. He can be contacted at 972.820.6777 or by visiting www.sabreen.com or www.plasticslasermarking.com.
